Using gravimetric sludge selection on conventional activated sludge (CAS) systems increases throughput, improves settling rates and promotes enhanced biological phosphorus removal (EBPR).
Our WWW™ inDENSE™ technology optimizes the performance of your CAS and clarifiers by offering a more stable operation while saving money.
Not sure where to start? Our inDENSE™ Sizing Calculator gives you a preliminary system configuration in minutes. Enter your maximum monthly wasting rate, daily hours of operation and WAS concentration, and the calculator returns a recommended cyclone count and skid configuration for your application. A built-in 3D viewer lets you visualize the footprint before you get into detailed design.
When you’re ready to take the next step, submit your requirements directly to our application engineers to develop a budgetary proposal.
As a gravimetric selection technology, WWW™ inDENSE retains denser biomass while the lighter fraction of the mixed liquor suspended solids (MLSS) flows out as waste activated sludge (WAS). Promoting higher densities improves sludge settling characteristics, preventing the loss of biomass and other treatment disruptions — especially during wet and cold weather events.
Promoting faster settling particles, optimized process configurations and physical selective forces encourage densified sludge formation. Hydrocyclones force denser flocs and solids to the cyclone walls and down through the underflow to be recycled, while lighter solids move toward the cyclone center and are pushed upwards through the overflow to be wasted.
By implementing external mechanisms for selective sludge wasting and optimized biological process configuration, facilities can streamline their operations at the lowest capital cost.
Contact us today to get started designing a wastewater solution for your application.